ASTM 240 cold rolled stainless steel sheets is American standard SS sheet. The main grades are 304 304L 316 316L SS sheet. The raw cold rolled SS sheet is hard, so the sheets need to be annealed before delivery to clients. Cold rolled stainless steel sheets are used to make anti-corrosion parts, oil and chemical engineering pipeline, containers, ship building and medical devices.
ASTM A240 Cold Rolled Stainless Steel Sheet thickness
Width & Length
Stainless steel sheet can be cur to sell
Comply with standard or requirements
Cold rolled, Annealing, Tempered
Physical properties of stainless 304L 316L stainless steel sheet
Total heat transfer coefficient of metal besides depends on the thermal conductivity of the metal, also depends on other factors. In most cases, the coefficient of heat transfer membrane layer, scale, and the surface condition of the metal. To maintain a clean and tidy surface of stainless 304L 316L stainless steel sheet, so its heat transfer is better than other higher thermal conductivity of metal. stainless 304L 316L stainless steel sheet plate technology standard stainless 304L 316L stainless steel sheet corrosion resistance, bending properties and weld toughness and good performance of stamping and welding parts of the processing of high strength stainless 304L 316L stainless steel sheet plate and its manufacturing method. Specifically to contain C: less than 0.02%, N: less than 0.02%, Cr: more than 11% less than 11%, proper content of Si, Mn, P, S, Al, Ni, and meet the 12 Cr Mo Si acuities were 17, 1.5 1 or less Ni 30 or less (C, N) 0.5 0.5 (Mn Cu) 4 or less, Cr, Ni Cu) 3.3 Mo acuity 16.0, 16.0 C or less N the stainless 304L 316L stainless steel sheet plate of 0.030 or less heating to 850 ~ 1250 ℃, and then to the cooling speed of more than 1 ℃ / S cooling heat treatment. So I can be inclusive of our 12% volume fraction on the horse's body organization, more than 730 mpa, high strength, corrosion resistance and bending performance, excellent welding toughness of high strength stainless 304L 316L stainless steel sheet plate. Recycling containing Mo, B, etc., can significantly improve the welding parts stamping processing performance.